Textile Finishing Machinery

TPYFB200S air turning machine is mainly used for over turning of the tubular fabrics. It is simple in structure, easy to operate, high efficient.

The Tubular Compactor machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 20mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

The machine equipped with 20mm seamless felt, magnetic levitation separate holder, electric oil cylinder, automatic hydraulic precise folder. It is mainly used for the preshrinking process of cotton. Blender fabrics that more than 65% cotton can use this machine also. Wool circular fabrics. Preshrink ratio 18%, shrinkage less than 5%

The Stenter Machine is used for cotton, chemical fiber and blended knitted and woven fabric open width padding auxiliaries, drying and styling process.

hot air stenter is mainly used for the cotton, polyester, wool, hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics.

The Open Width Compactor machine adopts advanced technology, specially designed and produced for knit fabric. It is a combined machine of 3in1, means stenter, dryer, compactor functions to be realized in this combined machine. Wet and dried fabric also could be processed by Open Width Compactor with different cost.

TPYRZ1600-2 series machine is used for impregnating soften agent and hydro-extractor process of the tubular fabrics, it can be substitute for centrifugal machine and wet expander. It is high efficient and easy to operate.

This machine adopts Five pass web belts tensionless drying, the hot air from the large centrifugal blower goes through the fabrics, the fabrics are shrunk through the three layers web belts, during the drying period, the fabrics move in large wave mode, completely non tension

GHRZ1600-2 series machine is used for impregnating soften agent and hydro-extractor process of the tubular fabrics, it can be substitute for centrifugal machine and wet expander. It is high efficient and easy to operate.

Heat Setting machine is designed for tubular fabric processing by high temperature, heat with Electricity or Steam. This machine could deal with all synthetic fiber except cotton material, width is around 1600mm.

Heat-Seting Stenter Machine

DGRZ1600-2 series machine is used for impregnating soften agent and hydro-extractor process of the tubular fabrics, it can be substitute for centrifugal machine and wet expander. It is high efficient and easy to operate.

It is used for tubular fabrics and open width fabrics drying,suitable for cotton,blender and polyester.During drying,the fabrics are being supported by the net belts all the time,upper and lower nozzles are blower ,the fabrics are moving in wave form,after several times vibrating and beating,the moisture will be evaporated,and the fabrics are dried gradually.During the whole drying process,the fabrics are in relax status,release the inside tension force fully,after preshrinking and setting to reach the ideal results

This machine adopts three pass web belts tensionless drying, the hot air from the large centrifugal blower goes through the fabrics, the fabrics are shrunk through the three layers web belts, during the drying period, the fabrics move in large wave mode, completely non tension.

The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process.

2800 open width compactor is a combination machine of pin plate stenter and felt compactor, it is used for the processing of 100% cotton, wool, hemp natural fabrics and chemical fabrics in open width form. After treatment by this machine, the latitude and longitude of the fabric will be steady, soft hand feel, water shrinkage can be controlled within 5%.

This machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 18mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

open width compactor is a combination machine of pin plate stenter and felt compactor, it is used for the processing of 100% cotton, wool, hemp natural fabrics and chemical fabrics in open width form. After treatment by this machine, the latitude and longitude of the fabric will be steady, soft hand feel, water shrinkage can be controlled within 5%.

GHLS2800 open width compactor is a combination machine of pin plate stenter and felt compactor, it is used for the processing of 100% cotton, wool, hemp natural fabrics and chemical fabrics in open width form. After treatment by this machine, the latitude and longitude of the fabric will be steady, soft hand feel, water shrinkage can be controlled within 5%.

Tubular Balloon Padder For Knitting Fabric， series machine is used for impregnating soften agent and hydro-extractor process of the tubular fabrics, it can be substitute for centrifugal machine and wet expander. It is high efficient and easy to operate.

Stenter(we have stenter both can work for weaving and knitting fabrics).

The machine equipped with 20mm seamless felt, magnetic levitation separate holder, electric oil cylinder, automatic hydraulic precise folder. It is mainly used for the preshrinking process of cotton. Blender fabrics that more than 65% cotton can use this machine also. Wool circular fabrics. Preshrink ratio 18% ,shrinkage less than 5%.

We are offering precisely engineered series of Stainless Steel Balloon Squeezers, which are used for infusing the soften agents as well as the execution of the hydro-extractor process of the tube-shaped fabrics. The machines can be the substitute for wet expander and centrifugal machines. Highly efficient these are easy to operate and have turn tables, which are driven by motor and can turn clockwise or anticlockwise in accordance with the straighten needing. The motors of the machines are controlled by push buttons inset in the control panel. The products have a balanced speed as these include the in-feed devices that are driven by motor, the speed can be attuned by inverter ensuring the the speed in phase. Some of the main parts of the machines are: Inverter, Water squeezing roller, Softener expression roller, Gear box motor, In feed web belt, Pneumatic components, Rough belts, Digital temperature controller, Low voltage electric sets, Triangle belt, Thermal couple etc. Our Stainless Steel Balloon Squeezers have the weight of 4.5 T with a minimum capacity of 4.5 ton & a maximum capacity of 5.5 ton.

tubular compactor for cotton fabrics

This machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 18mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

This machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 18mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

This machine is used for setting of tubular knitting fabrics,18mm Nomexa,Magnet separator strectcher,hydraulic lifting folder,after worked by the machine,user can get stable size.Shrinkage is below 5% and obtain good hand feeling.

The Tubular Compactor machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 20mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process.

The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process.

This tensionless dryer machine adopts three pass web belts tensionless drying, the hot air from the large centrifugal blower goes through the fabrics, the fabrics are shrunk through the three layers web belts, during the drying period, the fabrics move in large wave mode, completely non tension.

The Tubular Compactor machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 20mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

Used for open width cotton fabric and other natural fibers pre-shrinking process.

The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process.

This machine is used for processing of tubular chemical fiber fabric. The machine makes use of synthetic and blended fabric obtained by heating a fixed size. With stainless steel poles, the fabric into the heating chamber is heated under the poles support . It is out of the heating chamber and cooling , fixed size.

Stenter(we have stenter both can work for weaving and knitting fabrics).

This machine adopts hot air setting, maximum working temperature is 220C. it is used for heat setting of tubular polyester blender cotton fabrics. And it can be used for pre-setting of spandex. After worked by this machine, customer can get steady size, flat surface.

The Tubular Compactor machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 20mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

Tubular compactor

GHRZ1600-2 series machine is used for impregnating soften agent and hydro-extractor process of the tubular fabrics, it can be substitute for centrifugal machine and wet expander. It is high efficient and easy to operate.

The drying machine is used for drying cylinder and open-width fabric with three-layer belt. Because of circulating drying and run under different speed, the fabric could keep in loosen circumstance without any tension during the drying process.

The Tubular Compactor machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 20mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

We are offering Knit Fabrics Open Compacting Machines, which are embedded with feed device section. The device has fabrics guider, tension aligning frames, infra-red centering device, slide-proof paddle, machine body etc. The primary usage of this portion is to flat the fabrics and to move it in the center in an automatic manner. The head of the machines has manual weft straightener, screw spreading rollers, protecting panel, overfeed roller and rail and machine body. The primary usage of this part is to level the fabrics again and in-feed the fabrics to the bounds spreader in overfeeding variety. Cone-shaped stenter frame section is featured with overfeed pin on device, auto edge tracing device, screw spindles, protect panel, chain tension device etc. These machines of superior functionality come with parallel stenter frame section that consists of gemel, pin plate chain, chain driven device, width aligned device and protecting panel. The main role of this section is to steam and moisten the fabrics. Our exclusive Knit Fabrics Open Compacting Machines are available at competitive prices.

This machine is used for polyester fabrics,it adopts hot air setting,maximum working temperature is 220℃.it is used for heat setting of tubular polyester、blender cotton fabrics. After worked by this machine,customer can get steady size,flat surface.The machine has three heating mothod: electric,thermal oil,natural gas and liquefied gas,before order the machine,please inform.

Automatic manufactory cloth shrinking machine/heat setting and preshrinking machine with low price

The Tubular Compactor machine is used for preshrinking and ironed tubular fabric, and equipped with magnetic separating shuttle, hydraulic lifting platform, 20mm NOMEX carpet. The fabric could keep in a stable size during this process after drying machine. Less than 5% shrinkage and excellent softness could be reached.

This product for polyester and polycotton tubular knitted fabric, to do process of heat setting.

This machine is used before stenter and open width compactor. It can slit the tubular fabrics and then squeezing the water, immerse the softer, also it can squeeze water, immerse softner for the open width fabrics.Rope fabrics infeed directly and be slit,automatic detwister(automatically cenering slitting line device is optional), this machine enhance the manufacturing efficient, omit the flow process. So can save time and labour, shorten the production cycle.

It is used for heat setting process of the open width fabrics. After worked by the machine,fabrics will get stable size.