Stenter(we have stenter both can work for weaving and knitting fabrics).
DGLD2800 hot air stenter is mainly used for the cotton, polyester, wool, hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics.
open width fabrics infeed -- infra red expanding and centering -- padder -- zidond lower overfeeding -- screw expanding -- machincial weft straigtner -- upper overfeeding -- edge spreader -- infra-red inspector -- pin on -- heat setting -- coolant -- pin off -- exit -- plaiter or rolling.
Mainly technical parameters:
Machine working pattern:
chains circulation horizontal rotary
Heat setting pattern:
hot air circulation
pitch 60mm, stainless steel chains.
Rail pattern stainless steel rail, graphite strip, non oil lubrication
Machine standard power:
Applicable steam specification:
Applicable compressed air specification
0.3-0.6Mpa compressed airwithout moisture
Maximum temperature of the heating chamber
Applicable heat sourch
A. Circulation thermal oil
B. 2Kpa-3.5Kpa natural gas
Circulation oil consumption
Natural gas consumption
Main chain driven pattern
right and left chains drive seperately
Working width control pattern
working width of each chamber adjust seperately
Air delivery pattern of the heating chamber
upper blower chamber and lower blower chamber control air volume seperately.
Pin plate maximum working width
Heating chamber width
Power of some parts
Gluming, cutting, sucking device 6.74 KW(optional)
Pneumatic edge spreader 3KW
Driven device 45 KW
Each chamber power: 15.75kw
Machine dimensionï¼Maxï¼ L=18000+3000mm/chamber*Nchamber
about 12tons+4.5ton/chamberxN chamber
jewelry blue + Crystal White
Insulated pannel thickness
Juxian Road, Lingxian district, Dezhou, Shandong, 253000, China