0Cookie Img

Heat Setting Stenter (four six eight ten chambers)

Heat Setting Stenter (four six eight ten chambers)
Heat Setting Stenter (four six eight ten chambers)
Product Code : 03
270,000-280,000 / Set USD ($)
Price And Quantity
Minimum Order Quantity :
1
Unit of Measure :
Set/Sets
Price :
270,000-280,000 / Set USD ($)
Product Specifications
Product Type :
Textile Machinery
Voltage :
380 (60HZ) Volt/Ohm (v/ohm)
Weight :
45359 (50 Tons) Kilograms (kg)
Color :
Jewelry Blue + Crystal White
Warranty :
1 year
Product Description

Heat setting stenter (four six eight ten chambers)

YXLD2800 hot air stenter is mainly used for the cotton,polyester,wool,hemp of setting process for the open width fabrics, after worked by the machine, you can get stable size of the fabrics.

Technical flow:

open width fabrics infeed--infra red expanding and centering--padder--zidond lower overfeeding--screw expanding--machincial weft straigtner---upper overfeeding--edge spreader--infra-red inspector--pin on--heat setting---coolant---pin off--exit--plaiter or rolling

Mainly technical parameters

Machine working pattern: chains circulation horizontal rotary

Heat setting pattern: hot air circulation

Chains pattern: pitch 60mm,stainless steel chains.

Rail pattern stainless steel rail,graphite strip,non oil lubrication

Machine standard power: 380V(±5%)50Hz3PH

Control power: 220V, 24V

Applicable steam specification: 3-6Kg/cm²saturated steam

Steam consumption: 100~150kg/hour

Applicable compressed air specification:0.3-0.6Mpa compressed air without moisture

Maximum temperature of the heating chamber: 220℃

Applicable heat sourch

  • A. Circulation thermal oil
  • B. 2Kpa-3.5Kpa natural gas

Circulation oil consumption:80000-140000Kcal/ H·chamber(0.33-0.6GJ)

Natural gas consumption: 8-15m³/H·chamber(about6.5-12KG)

Main chain driven pattern: right and left chains drive seperately

Working width control pattern: working width of each chamber adjust seperately

Air delivery pattern of the heating chamber: upper blower chamber and lower blower chamber control air volume seperately.

Pin plate maximum working width:2000mm-3000mm

Heating chamber width: 3000mm/chamber

Mechanical speed : 5~80m/min

Power of some parts: Padder:12.5kw

Gluming,cutting,sucking device 6.74 KW(optional)

Pneumatic edge spreader 3KW

Driven device 45 KW

Each chamber power: 15.75kw

Machine dimension(Max)

L=18000+3000mm/chamber*Nchamber

W=2700+working width

H=3000

Machine weight: about 12tons+4.5ton/chamber x N chamber

Machine colour: jewellery blue + Crystal White

Insulated panel thickness:150mm

Contact Us

Juxian Road, Lingxian district, Dezhou, Shandong, 253000, China
Phone :86-534-2776588